Lalal.ai Audio Splitter Review: Can You Split Mono Into Stereo? If you’re using a recorder with two XLR/TRS combo ports, as well as a 3.5mm input (such as the Zoom H4 or Zoom H5), then you can use four microphones at the same time. You can set the gain of each independently, before and during the recording.īut if you’re using a smaller model of recorder that only has a 3.5mm port for external inputs, the Hosa Breakout gets you as close to two-channel recording as you’re likely to find with this type of setup.
AUDIO SPLITTER MIC AND HEADPHONE FULL
This gives you full control over both mics. My first choice for using two lav mics simultaneously is to run them into the Zoom H5‘s XLR/TRS combo ports, using 3.5mm to 1/4″ mono adapters. This means you can alter the levels of each participant independently if one person was a bit too loud or a bit too quiet. When you record in this manner, you can split the sides of your stereo track into two mono tracks in your editing software. There’s still a bit of “bleed” from one side to the next, but it’s minimal.
This means that both sides mirrored each other, as you can see in the first screenshot.īut if you’re using a stereo splitter like the Hosa Breakout model, you can clearly see the difference on both channels. When I ran two lavalier mics into my digital recorder using a normal mic splitter, the audio was recorded in “joint stereo”. But if one is talking a lot louder than the other, that’s going to be hard to fix in the editing phase. Here, you’ll still benefit from both participants being more “on-mic” (because they both now have their own mics). If you’re using a standard mic splitter for this, then the audio is going to be recorded in “joint stereo”. The best “affordable quality” lavalier option out there right now, in my opinion, is the Rode Lavalier Go. These would also be 3.5mm connecting mics – commonly, lavalier mics. But the sound levels are going to be inconsistent based on each person’s distance from the recorder, as well as how loud they talk.Īn alternative is to run a splitter into your recorder’s 3.5mm input jack. Sure, you can record multiple participants into the device’s built-in mics. Basically, a recorder that doesn’t have any XLR inputs to let you plug in multiple mics. One of the most novel ways of using a mic splitter is if you have a small digital recorder, like the Tascam DR-05. Using a Mic Splitter to Create “Two Channel” Recording So let’s take a look at how and why a microphone splitter might help you record better sounding audio. In this post, I’m going to focus on the latter. Or, you might be recording into one device but you’d like to send the audio to a backup recorder too. Plugging in a splitter will let you connect two pairs of headphones or earbuds. So what’s an example of this? Well, it might be that you and a friend are recording into a mic with only one headphone jack, but you’d both like to wear headphones. A mic splitter cable (or audio splitter) is something you might use if you want to send the audio from one source to two or more places.
0 kommentar(er)
